- Domeniu: Oil & gas
- Number of terms: 9502
- Number of blossaries: 0
- Company Profile:
George King is a technology provider in the oil and gas industry specializing in new technology and problem oil well solutions.
A sealing formation of very low permeability that forms the top or the seal in a reservoir.
Industry:Oil & gas
A second (or higher) attempt to drill a wellbore after the first wellbore has been junked. This saves re-drilling the top part of the hole but requires drop back to a smaller wellbore size in the sidetrack. Also can be a second wellbore.
Industry:Oil & gas
A secondary fault, often in a set, with an opposite direction to the primary fault.
Industry:Oil & gas
A secondary fault, often in a set, with opposite direction to the primary fault.
Industry:Oil & gas
A secondary or repair cement method using upper and lower perforations and a packer set between. Circulation is established with water and mud remover chemicals to clean the channel. Cement is circulated with a set volume pumped, then the packer is released and pulled above the zone. The cement is displaced from the tubing. A secondary squeeze may be done.
Industry:Oil & gas
A secondary well, after a field discovery well, drilled to help determine field extent, volume or potential rate.
Industry:Oil & gas
A section in a downhole tool string than can be actuated by ball or pressure to allow recovery of the pipe string if the tool is stuck.
Industry:Oil & gas
A section in a part of the wellhead that accommodates the tubing hanger.
Industry:Oil & gas
